RaSCSI Install

Follow the RASCSI setup instructions and ./easyinstall.sh. The steps are copied below:

Perform updates and add libraries

sudo apt-get update && sudo apt-get install git libspdlog-dev protobuf-compiler libpcap-dev

Clone the rascsi repository

cd ~  
git clone https://github.com/akuker/RASCSI.git

Perform easy install for a Full Spec board

cd ~/RASCSI
./easyinstall.sh

Or, if you have a STANDARD board

cd ~/RASCSI
./easyinstall.sh -c=STANDARD

Choose "1" to install or update RaSCSI Service + Web Interface

Choose among the following options:
INSTALL/UPDATE RASCSI (FULLSPEC version)
1) install or update RaSCSI Service + Web Interface
2) install or update RaSCSI Service
3) install or update RaSCSI OLED Screen (requires hardware)
CREATE HFS FORMATTED (MAC) IMAGE WITH LIDO DRIVERS
** For the Mac Plus, it's better to create an image through the Web Interface **
4) 600MB drive (suggested size)
5) custom drive size (up to 4000MB)
NETWORK BRIDGE ASSISTANT
6) configure network bridge for Ethernet (DHCP)
7) configure network bridge for WiFi (static IP + NAT)
INSTALL COMPANION APPS
8) install AppleShare File Server (Netatalk)
9) install Web Proxy Server (Macproxy)
ADVANCED OPTIONS
10) compile and install RaSCSI stand-alone
11) configure the RaSCSI Web Interface stand-alone
EXPERIMENTAL FEATURES
12) install or update RaSCSI Control Board UI (requires hardware)
Enter your choice (0-12) or CTRL-C to exit: 1

Restart the syslog and configure systemd to start RaSCSI at boot

sudo systemctl restart rsyslog
sudo systemctl enable rascsi # optional - start rascsi at boot
sudo systemctl start rascsi
sudo systemctl status rascsi