Netatalk APF for linux install

Also see Apple File Share section Mac Librian's excellent youtube RaSCSI tutorial

cd ~/RASCSI
./easyinstall.sh

Choose "8" to intall Netatalk

    .~~.   .~~.
  '. \ ' ' / .'
   .╔═══════╗.
  : ║|¯¯¯¯¯|║ :
 ~ (║|_____|║) ~
( : ║ .  __ ║ : )
 ~ .╚╦═════╦╝. ~
  (  ¯¯¯¯¯¯¯  ) RaSCSI Assistant
   '~ .~~~. ~'
       '~'


Choose among the following options:
INSTALL/UPDATE RASCSI (FULLSPEC version)
1) install or update RaSCSI Service + Web Interface
2) install or update RaSCSI Service
3) install or update RaSCSI OLED Screen (requires hardware)
CREATE HFS FORMATTED (MAC) IMAGE WITH LIDO DRIVERS
** For the Mac Plus, it's better to create an image through the Web Interface **
4) 600MB drive (suggested size)
5) custom drive size (up to 4000MB)
NETWORK BRIDGE ASSISTANT
6) configure network bridge for Ethernet (DHCP)
7) configure network bridge for WiFi (static IP + NAT)
INSTALL COMPANION APPS
8) install AppleShare File Server (Netatalk)
9) install Web Proxy Server (Macproxy)
ADVANCED OPTIONS
10) compile and install RaSCSI stand-alone
11) configure the RaSCSI Web Interface stand-alone
EXPERIMENTAL FEATURES
12) install or update RaSCSI Control Board UI (requires hardware)
Enter your choice (0-12) or CTRL-C to exit: 8

Edit /etc/netatalk/atalkd.conf and add rascsi_bridge to the end

sudo nano /etc/netatalk/atalkd.conf

# Format of lines in this file:
#
#    interface [ -seed ] [ -router | -dontroute ] 
#       [ -phase { 1 | 2 } ] [ -addr net.node ]
#       [ -net first[-last] ] [ -zone ZoneName ] ...
#
# -seed only works if you have multi-interfaces.  Any missing arguments are
# automatically configured from the network.  Note: lines can't actually be
# split, tho it's a good idea.
#
# -router is like -seed but it allows single-interface routing. -dontroute 
# disables routing for the specified interface.
#
# Some examples:
#
#       The simplest case is no atalkd.conf.  This works on most platforms
#       (notably not Solaris), since atalkd can discover the local interfaces
#       on the machine.
#
#       Very slightly more complicated:
#
#               le0
#       or
#               eth0
#
#       for Solaris or Linux.
#
#       A much more complicated example:
#
#               le0 -phase 1
#               le1 -seed -phase 2 -addr 66.6 -net 66-67 -zone "No Parking"
#
#       This turns on transition routing between the le0 and le1
#       interfaces on a Sun.  It also causes atalkd to fail if other
#       routers disagree about it's configuration of le1.
#

rascsi_bridge

Restart afpd service

sudo systemctl restart afpd

A default afpshare folder has been created in your home directory

screenshot

Go to Chooser in apple menu and open appleshare folder at 192.168.0.241

screenshot